Comments (9)

  1. Kajidal

    Reply
    Jan 06,  · the hot glue "restrictors" I made were way too big and restricted almost all movement unless pressed very hard. Took a sharp knive and trimmed them down quite a bit, tried to get close to the nubs on the other side.
  2. Shakarn

    Reply
    5. File and sand each part to a smooth finished size. 6. Using the strip heater bend the motor support to shape. 7. Drill a Ø7mm hole in the top section of the motor support for the switch. 8. Attach the rectangular motor insert using machine screws. 9. Attach the upright panel using glue .
  3. Mogul

    Reply
    Sean Lange & @Dan Guzman: thanks for your replies. The reason to not store in separate blobs is that a blob contains files that are legs of 1 phone call (having 1 conn id), with the files corresponding to transfers to different agents or to an mp4 agent screen recording.
  4. Mijora

    Reply
    Sep 17,  · 8. Avoid extremes in temperature – Elevated temperatures promote the vapor pressure or volatility of the CA monomer, leading to higher blooming vulnerability. Conversely, lower temperatures slow the reaction mechanism, causing prolonged cure time and opportunity for the CA monomer to become airborne.
  5. Meztirn

    Reply
    8 Glue Team Files We understand the need for other systems to communicate with Glue and the need to extract data from Glue to other systems. Each Glue Team is set up with a file storage that can be used to share arbitrary files with other team members. In addition to file sharing, various types of.
  6. Sajas

    Reply
    While MP3 files can usually be glued together with no problem, occasionally you will find some that act weird. For example, a five-hour long file will only appear as one hour on your iPod. In these cases you can use an audio-editing program like GoldWave, which is not too hard for average people to use.
  7. Mazuhn

    Reply
    Dec 05,  · If the glue is for strain relief, DON'T put it right on the contacts. Glue the wire to the board somewhere else an inch or two back. As long as you have good strong joints, it'll do the same thing but still make it repairable if you need to.
  8. Tauzuru

    Reply
    files€•€ Auto Stretch when notes are moved or copied€•€ The difference between editing and assigning tempo Editing tempo (stand-alone) Opening the Tempo Editor and overview€•€ Editing the tempo curve€•€ Tempo changes in the transport bar€•€ The contextual menu€•€ .
  9. Fenrim

    Reply
    Cut 2 more 2x10" pieces to form the sides, and glue them on. Finally, cut the 2 (10 3/8)x2" pieces for the top and bottom. My foam was 3/16" thick, so I had to add 3/8" to the length to make them long enough to cover the sides. Hot glue them on.

Leave a comment

Your email address will not be published. Required fields are marked *